rubber mulch EPT rubber mulch reducing EPT
The EPT tire recycling EPT will be controlled by the PLC, all the components will be approach inside of of EPTs, there is Real ZERO Pollution. one labor, 1 engineer can run all the EPTs, no need to have to run the EPTs, just control the PLC. the EPTs can shield the EPTs, function the EPTs and preserve the EPTs operate effortlessly.
Specification
1.Tire shredEPTEPT
The Rubber ShredEPTEPT undertake PLC automated manage technique, with automatic reversal management method in overload condition. Two-shaft tire crusher is EPTly developed for outdated tires with reduced pace and substantial torque to decrease sounds and EPT use.
The blade of the shredEPTis produced of large high quality steel and subjected to Bodycote heat therapy to obtain the greatest crushing overall performance.The shredEPTis simple to disassemble and change cutter blade and suited for tearing large, additional thick and difficult resources.The thickness variety of the crushing blade is 25mm-152mm according to the tire sort,output and closing product. The grinEPTcan procedure OTR tires,large truck tires,car tires and so on at the pace of one-30tons whithin one hour.
| Product | Input dimensions | Output size | Cappacity | Motor | Blades quantity | Proportions | Excess weight |
| TS-800 | 800mm | 50*50mm | one-2T/h | 2*22kw | 16pcs | four*2.six*three.2m | 8T |
| TS-1200 | 1200mm | sixty*60mm | 3-5T/h | two*37kw | 20pcs | 4.eight*2.8*3.5m | 14T |
| TS-1600 | 1600mm | fifty-150mm | 6-8T/h | two*45kw | 16-30pcs | five*two*three.4m | 18T |
| TS-1800 | 1800mm | 50-150mm | 7-10T/h | 2*55kw | 20-24pcs | 5.six*two*3.4m | 23T |
| TS-2000 | 2000mm | 75-200mm | 10-15T/h | 2*75kw | 20-30pcs | 6*2.four*4m | 36T |
| TS-2400 | 2400mm | a hundred-200mm | 20-30T/h | two*110kw | 16-24pcs | seven.4*three.2*5.2m | 56T |
2.Rasper
EPT tire shredding technique is developed to generate up to 6 tons per hour of wire free rubber mulch.This system produces up to a 99% wire free chip ranging in measurement in between twelve-25mm dependent on the wanted dimension.Soon after processing,the metal is eliminated by our magnetic separation method.At this position,the wire totally free rubber chips are all set to be colored and used for landscaping mulch and the metal is ready to be baled and marketed to smelters.
| Rasper | Motor | EPT | Ability | Dimensions | Bodyweight | Cutting chamber | Closing item |
| R45 | Siemens | 45KW | 300-500kg/H | 1.4*1.2*2.3m | 1700kg | 450*600mm | 10-30mm |
| R55 | Siemens | 55KW | five hundred-700kg/H | 1.seven*one.seven*two.3m | 1850kg | 450*800mm | 10-30mm |
| R75 | Siemens | 75KW | seven hundred-1T/H | 2*2*4.1m | 3500kg | 550*800mm | ten-30mm |
| R90 | Siemens | 90KW | 1-one.5T/H | two.one*two.1*4.1m | 4200kg | 550*1000mm | 10-30mm |
| R132 | Siemens | 132KW | 1.five-3T/H | two*two.5*4.1m | 6100kg | 742*1200mm | 10-30mm |
| R315 | Siemens | 315KW | 3-6T/H | six.2*two.one*three.6m | 12400kg | 697*1562mm | ten-30mm |
three.Granulator EPT
Squander Tire Recycling Rubber Granule Creating EPT is adopting physical recycling technique and is developed to grind the rubber mulch from the rasper into modest granules as fine as 1-6mm. The granules are screened and re-circulated until finally the desired dimensions is reached. This Entirely-Automated Tyre Recycling Line managing in typical temperature, no want to add any other chemical substances, no air pollution to the setting. This is the ideal way to recycling scrap tires.
| Granulator | G37 | G45 | G90 |
| Motor | Siemens | Siemens | Siemens |
| EPT | 37kw | 45kw | 90kw |
| Capacity | three hundred-500kg/h | five hundred-800kg/h | 800-1500kg/h |
| Dimensions | one.8*1.six*two.4m | 1.8*1.nine*two.4m | 2.two*two.3*3m |
| Closing solution | 1-6mm | one-6mm | 1-6mm |
four.Miller
Rubber powEPTis the closing end result of ambient tire recycling.At this stage,crumb rubber is floor down into a clear powEPTform with practically all metal and fiber taken out.Rubber powEPThas quite a few secondary uses from injection molding goods,coatings,roofing components and various asphaltapplications.
Rubber powEPTis generally found in 40-74 microns(.forty-.74mm) in measurement.This micron dimension metarial has the gain of being integrated into new or eXiHu (West Lake) Dis.sting formulations for numerous polymers and completed items.
| Rubber powder | M2000 | M1500 | M1000 | M500 |
| Enter solution | Weighty obligation truck tyres to bicycle tyres | |||
| Input dimensions | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm | Diameter 1800mm |
| Output size | shred to thirty-120 mesh rubber powder | |||
| Ability | 2000kg/h | 1500kg/h | 1000kg/h | 500kg/h |
| Complete Kw | 680-760kw | 516-556kw | 347-372kw | 170-190kw |
Mob 151366 0571 six
FAQ:
Q1,Are you a factory or a buying and selling organization?
A. We are a company with 30 years creation expertise in tire recycling EPT. We have export license, we can offer you the factory charges.
Q2. Can you guarantee the capability as you pointed out ?
A. Definitely of course,besides that,we also give three-5years guarantee.
Q3, are you positive the ultimate rubber powEPTcan be totally clear out of wire steel or nylon ?
A. The ultimate powEPTpurity can get to ninety nine.nine%. we have magnetic separator which can separate the wire metal from the rubber powder.
