Solution Description
rubber processing EPTry/ rubber shredEPTEPT for tires
Advantage of our rubber processing EPTry:
one. Far more than twenty years of expertise.
two. PatEPTd Merchandise,one/three power conserving!
3. CE amp ISO9001 certificate.
four, 2 many years guarantee for the EPTs and three years for the rollers.
Process flows:
Tyre recycling EPT is used to make the squander tyre into rubber granules or rubber powder. It can take care of equally radial tyre and nylon tyre, get rid of the nylon or steel in the squander tire.
waste tires— tire circle cutting— tire strips reducing— tire slice reducing— tire crushing — magnetic separating— fiber separation-EPT-put in storage.
This generation line incXiHu (West Lake) Dis.Hu (West Lake) Dis. the beneath:
| Identify of products | Quantity(established) | Instruction | |
| Pre-chopping tools | Tire circle cutter | one | To minimize doen the tire bead |
| Tire strip cutter | 1 | To minimize the tires into rubber strips | |
| Tire slice cutter | 1 | To reduce the rubber strips into rubber blocks | |
| Rims separator | 1 | To individual the metal wires from the tire bead minimize down | |
Tyre Crusher: employed to crush the rubber block into five-a hundred mesh rubber powder
| Model No. | XKP-350 | XKP-four hundred | XKP-450 | XKP-560 | XKP-560D |
| Diameter of front roll | 300mm(groove) | four hundred mm (groove) | 450 mm (groove) | 560 mm (groove) | 560 mm (groove) |
| Diameter of again roll | 300mm(groove) | 400 mm (groove) | 450 mm (groove) | 560 mm (groove) | 560 mm (groove) |
| Drum doing work duration | 500mm | 600mm | 760mm | 800mm | 1000mm |
| Entrance roll liner pace | 26.2 | 34.5 m/min | 38. m/min | 40.6m/min | 44m/min |
| Roll ratio | 1:two.five | 1:two.five | 1:2.five | 1:two.five | 1:2.5 |
| Max roller spacing | eight mm | 8 mm | eight mm | eight mm | 8 mm |
| Motor EPT | 37KW | 45KW | 55KW | 75KW | 132KW |
| Bodyweight | 6T | 8.5 | twelve T | 13 T | 25T |
Information of our two grooved rollers:
one. Crusher roller speed ratio: Ours is one: 2.five, whilst the old variety roller speed ratio is 1: 1.38.
2. Roller composition: Our two rollers are each grooved, which improve the friction and then improve the output, even though the old kind is one with groove, and the other is easy.
three. Roller material: The roller is created by Welding wear resistant alloy components, 5Cr6MnMo. We can offer you 3 many years guarantee of the roller. Whilst the previous types EPT use solid iron to make the rollers, very straightforward to break or crack in two .
Related AuXiHu (West Lake) Dis.liary Tools:
| Title of equipment | Amount(established) | Instruction | |
| Related AuXiHu (West Lake) Dis.liary Gear | Principal vibrating display | 1 | Independent the rubber powEPTfor the initial time (five-ten mesh) |
| Vice vibrating monitor | 1 | Individual the rubber powEPTfor the 2nd time (the last measurement of rubber powEPTwe need) | |
| Conveyor belt | 1 | To transfer the rubber powEPTthat couldn’t fulfill the mesh requirested back to tire crusher and crush once more | |
| Fiber separator | 1 | Individual the nylon from rubber powder | |
| Magnetic separator | 2 | Different the metal wire from rubber powder | |
| Remark | The above equipments constitute the comprehensive established of squander tyre recycling EPT, no need add any EPT a lot more. | ||
Certification
EPT situations :
Loading :
