Waste Tire Recycling EPT / Rubber PowEPTEPT (XKP350/ 400/ 450/ 560/ 560L)
Squander tire recycling rubber powder EPT
It has subsequent outstXiHu (West Lake) Dis.Hu (West Lake) Dis. advantages:
No pollution: Different the fiber, wire and rubber entirely unEPTnormal temperature by actual physical methods, zero-emission of waste gasoline, h2o and feigh.
Lower consumption: Most affordable energy intake and labor value. Utilised Tyre Recycling Plant.
High functionality: Capable of disposing the squander tires which the diameter is significantly less than 1250 mm into five-40 mesh crumb rubber.
Our EPT waste tire recycling rubber powder manufacturing line is utilized to make squander tires and rubber into rubber crumb and rubber powder.
one. Process flow:
Waste tire-tire circle cutter -tire strip cutter-tire slice cutter-XKP 350/400/450/560/560L–magnetic separator-fiber separator–concluded merchandise (rubber powder).
2. This manufacturing line incXiHu (West Lake) Dis.Hu (West Lake) Dis. the underneath:
|
Name of products |
Amount |
Instruction |
|
|
Host equipment |
Rubber crusher |
one |
Product No.: XKP350/XKP400/XKP450/XKP560/XKP560L |
|
AuXiHu (West Lake) Dis.liary EPT |
Tire Circle cutter |
one |
To reduce open up the joint of the tire’s facet and top |
|
Tire Strip cutter |
one |
Reserve the wire hoop, lower the ties with no sidewalls into strips |
|
|
Tire Slicing cutter |
one |
Lower the strips into chunks about 3.five cubic centimeter |
|
|
Principal vibrating monitor |
one |
Independent the rubber powEPTfor the first time (5-ten mesh) |
|
|
Conveyor/feeder |
one |
To transfer the rubber powEPTthat could not fulfill the mesh count’s need back again to host EPT to crush yet again |
|
|
Fiber separator |
1 |
Individual the concluded product of rubber powEPT(10-forty mesh) |
|
|
Magnetic separator |
2 |
Extract and different mental wire from the rubber powder |
|
|
Remark |
The previously mentioned equipments constitute the comprehensive established of scrap tire rubber powEPTEPT. |
||
|
Steel wire separator |
1 |
Particular for extract wires in the tire’s circle |
|
(1) Tire circle cutter
The circle reducing EPT is an by yourself accent EPT, it puts the tire which is increased than 650 sort (both nylon and metal wire) flat on the EPT, locking tire inside opening through up and down locking method, then placing alloy instruments to focus on to the location of disintegration of tire to lower off the mouth and nation of tire, concluded in three minutes. The EPT is 4kw Revolting speech is 40r/min, Form dimension: 1.8m*one.3m*1.6m.
|
Identify of product |
Motor EPT |
Bodyweight |
Capacity |
Specification |
General dimension |
|
Tire circle cutter |
four.75KW |
650 kg |
40PCS/h |
650- 1250 mm (Each strengthened tire and nylon tires) |
1.8m*one.3m*one.6m |
(two) Tire Svacation cutter
Tire strip cutting EPT make use of two round EPT slicing tools to mix managing chopping. It can cut the tire of circle reducing into 3-8mm broad strip, to use for dicer reducing. The substance of this EPT’s knife disk is EPT alloy structural metal (scientific identify: Nine-chrome-silicon), diameter of knife disk is Phi390mm, hardness is fifty eight-62GrS, a lot more resilient. With the hand grinding wheel solid when not sharp, EPT is 4kw, revolting speech is 45r/min, condition dimension: 1.3m*.8m*one.65m.
|
Name of solution |
Motor EPT |
Perform selection |
Processing pace |
Demission |
Bodyweight |
|
Tire strip reducing EPT |
5.5KW |
Tire of 650-1250 mm |
20-35 strips/h |
one.3m*.8m*one.65m |
850 kg |
(3) Tire Slice cutter
Tire slice slicing EPT: The EPT is geared up for the crush of host EPT, it tends to make the chopping strip-variety waste rubber minimize into about three*8cm small parts, which can EPTr into host EPT very easily, high output and won’t injury roller.
|
Identify of solution |
Motor EPT |
Weight |
Developed yield |
Dicer specification |
|
Tire slice cutting EPT |
five.5 KW |
800 kg |
.eight T/h |
3*five*8 cm |
(4)Metal wire Separator
(five)Tire crusher’s Specialized parameter:
|
Model No. |
XKP-four hundred |
XKP-450 |
XKP-560 |
XKP-560L |
|
Diameter of entrance roll |
400 mm (groove) |
450 mm (groove) |
560 mm (groove) |
560 mm (groove) |
|
Diameter of back again roll |
four hundred mm (groove) |
450 mm (groove) |
510 mm (groove) |
560 mm (groove) |
|
Drum functioning size |
600mm |
760mm |
800mm |
1000mm |
|
Front roll liner velocity |
34.five m/min |
38. m/min |
forty.6m/min |
44m/min |
|
Roll ratio |
one: 2.five |
one: two.5 |
1: 2.5 |
one: two.five |
|
Max roller spacing |
ten mm |
10 mm |
ten mm |
10mm |
|
Motor EPT |
45KW/55KW |
75KW/90KW |
90KW/one hundred ten KW |
132KW/160KW |
|
Weight |
eight.five T |
11T |
17.5T |
23T |
|
L*W*H |
4.3*one.8*1.6m |
4.six*2.*one.65m |
five.3*2.*1.7m |
five.six*2.*1.7m |
| Suggestions: Both rollers are grooved which can boost the output. Roller substance is Alloy 5Cr6MnMo. There are 8 items bearing within the EPT, all rolling bearing(anti-friction bearing). |
||||
three. Shipping pictures
